Achieve a beautiful, natural finish with Barrettine ArmourFlex Pure Tung Oil – a high-quality, pure oil designed to deeply nourish, protect, and enhance interior and exterior wood. Ideal for worktops, furniture, chopping boards, and wooden tools, this traditional wood treatment delivers a warm, water-resistant finish without synthetic additives.
Naturally derived and food-safe when fully cured, Pure Tung Oil penetrates deep into the wood grain to create a durable, non-toxic barrier against moisture, stains, and wear. Its rich, matte finish brings out the natural character of the wood, making it perfect for both restoration and new projects.
Key Features:
- 100% pure, natural Tung oil.
- Penetrates deeply to protect and condition wood.
- Water- and stain-resistant finish.
- Food-safe when fully cured.
- Ideal for interior and exterior use.
- Suitable for wooden kitchenware, furniture, and joinery
Size: 500 ml
Preparation & Application:
- Ensure wood is clean, dry, and free from previous coatings or contaminants.
- Sand surface if needed and remove dust before applying.
- Apply with a lint-free cloth or natural bristle brush, following the grain.
- Leave to penetrate for 20–30 minutes, then wipe off any excess oil with a clean cloth.
- Allow at least 24 hours between coats. Apply 3–5 coats for best protection, especially on porous wood.
- Do not apply in temperatures below 10°C or in damp conditions.
- Coverage: approximately 10–14 square metres per litre depending on wood type and porosity.
- Clean tools with white spirit immediately after use.
Precautions:
- Always wear appropriate protective gloves and ensure good ventilation.
- Store in a cool, dry place with the lid tightly closed.
- Oily cloths may self-combust – dispose of safely in a sealed metal container or soak in water before disposal.
- Test on an off-cut or inconspicuous area to check compatibility and finish.
- Not recommended for use over previously sealed or varnished surfaces.
Reviews
There are no reviews yet.