Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
Extra Child Proof tamper evident Cap for Shiny Hardware Bottles
CPC
In Stock

Child Proof tamper evident Cap:

Child proof cap requiring the user to push down and twist. There is a band at the base of the cap that comes off when the cap has been opened.

Resealable Spout Cap:

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

Finger Spray:

Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger Spray:

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

General:

  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
£0.26 (£0.22 ex VAT)
Extra Finger spray Cap for Shiny Hardware Bottles
FS
In Stock

Child Proof tamper evident Cap:

Child proof cap requiring the user to push down and twist. There is a band at the base of the cap that comes off when the cap has been opened.

Resealable Spout Cap:

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

Finger Spray:

Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger Spray:

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

General:

  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
£0.46 (£0.38 ex VAT)
Shiny Hardware 20ml glass dropper set
Dropper-20ml
In Stock

20ml Glass bottle with pipette.

£1.32 (£1.10 ex VAT)
SHL Extra Empty unlabelled 1000ml bottle (no cap)
1000-BOT
In Stock
Shiny Hardware bottles are compatible with all our available cap types.

Bottles are capable of storing Acetone, MEK and Isopropanol.

Available Caps:

Child Proof tamper evident cap, this is the standard cap fitted to all the filled bottles we supply. All empty bottles aresupplied without a cap.

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

(Please note this cap  needs to be tightened a LOT before it seals, please test it prior to use)
Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

20ml Dropper bottle the ideal accompaniment to the crab claw spout seal cap. Amber glass bottle and glass pipette.
  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
  • For long term storage customers are advised to put the child proof cap back on.
£1.23 (£1.03 ex VAT)
SHL Extra Empty unlabelled 125ml bottle (no cap)
125-BOT
In Stock
Shiny Hardware bottles are compatible with all our available cap types.

Bottles are capable of storing Acetone, MEK and Isopropanol.

Available Caps:

Child Proof tamper evident cap, this is the standard cap fitted to all the filled bottles we supply. All empty bottles aresupplied without a cap.

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

(Please note this cap  needs to be tightened a LOT before it seals, please test it prior to use)
Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

20ml Dropper bottle the ideal accompaniment to the crab claw spout seal cap. Amber glass bottle and glass pipette.
  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
  • For long term storage customers are advised to put the child proof cap back on.

£0.51 (£0.43 ex VAT)
SHL Extra Empty unlabelled 250ml bottle (no cap)
250-BOT
In Stock
Shiny Hardware bottles are compatible with all our available cap types.

Bottles are capable of storing Acetone, MEK and Isopropanol.

Available Caps:

Child Proof tamper evident cap, this is the standard cap fitted to all the filled bottles we supply. All empty bottles aresupplied without a cap.

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

(Please note this cap  needs to be tightened a LOT before it seals, please test it prior to use)
Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

20ml Dropper bottle the ideal accompaniment to the crab claw spout seal cap. Amber glass bottle and glass pipette.
  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
  • For long term storage customers are advised to put the child proof cap back on.
£0.67 (£0.56 ex VAT)
SHL Extra Empty unlabelled 500ml bottle (no cap)
500-BOT
In Stock
Shiny Hardware bottles are compatible with all our available cap types.

Bottles are capable of storing Acetone, MEK and Isopropanol.

Available Caps:

Child Proof tamper evident cap, this is the standard cap fitted to all the filled bottles we supply. All empty bottles aresupplied without a cap.

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

(Please note this cap  needs to be tightened a LOT before it seals, please test it prior to use)
Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

20ml Dropper bottle the ideal accompaniment to the crab claw spout seal cap. Amber glass bottle and glass pipette.
  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
  • For long term storage customers are advised to put the child proof cap back on.

£0.87 (£0.73 ex VAT)
SHL Extra Resealable spout Cap for Shiny Hardware Bottles
SCS
In Stock

Child Proof tamper evident Cap:

Child proof cap requiring the user to push down and twist. There is a band at the base of the cap that comes off when the cap has been opened.

Resealable Spout Cap:

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

Finger Spray:

Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger Spray:

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

General:

  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
£0.26 (£0.22 ex VAT)
SHL Extra Trigger spray Cap for Shiny Hardware Bottles
TS
In Stock

Child Proof tamper evident Cap:

Child proof cap requiring the user to push down and twist. There is a band at the base of the cap that comes off when the cap has been opened.

Resealable Spout Cap:

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

Finger Spray:

Finger Spray Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

Trigger Spray:

Trigger spray cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

General:

  • The diptube on the Finger spray and trigger sprays requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)
£0.61 (£0.51 ex VAT)