Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
SHL Empty 250ml Bottle, CHILD PROOF CAP
250emptyCPC
In Stock

Shiny Hardware Limited Bottles are strong HDPE, They are compatible with all our lids and chemicals (Isopropanol, Acetone and MEK)

Our child proof tamper evident cap is the default cap for all FILLED bottles, if you order a 1 litre iso with TRIGGER SPRAY (for example) the bottle will still come sealed with this cap and the Trigger cap seperately in the parcel.(Empty Bottles come only with the cap type purchased)

Requiring you to push down to rotate the cap it leaves a plastic ring around the neck of the bottle when opened the first time.



£1.19 (£0.99 ex VAT)
SHL Empty 250ml Bottle, CRAB CLAW and SEAL CAP
250emptyCLAW
In Stock

Shiny Hardware Limited Bottles are strong HDPE, They are compatible with all our lids and chemicals (Isopropanol, Acetone and MEK)

The spout top with resealable cap, requires customers to trim the end from spout using sharp scissors or a craft/stanley knife. The closer to the tip you create your opening the slower and finer the flow of liquid will be.

(Please note this cap  needs to be tightened a LOT before it seals, please test it prior to use)



£0.65 (£0.54 ex VAT)
SHL Empty 250ml Bottle, FINGER SPRAY
250emptyFINGER
In Stock

Shiny Hardware Limited Bottles are strong HDPE, They are compatible with all our lids and chemicals (Isopropanol, Acetone and MEK)

FINGER SPRAY Cap. To create a fine mist of spray ideal for screen and whiteboard cleaning supplied with a small cap to seal the unit.

*We do not recommend this cap type on our 1000ml bottles, they can become a bit tricky to handle.

  • The diptube on the FINGER SPRAY and TRIGGER SPRAYs requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)


£1.05 (£0.88 ex VAT)
SHL Empty 250ml Bottle, TRIGGER SPRAY
250emptyTRIGGER
In Stock

Shiny Hardware Limited Bottles are strong HDPE, They are compatible with all our lids and chemicals (Isopropanol, Acetone and MEK)

TRIGGER SPRAY cap, for distribution of liquid over a larger area, there are 3 settings, OFF/MIST/JET so you can distribute the contents as a fine mist, ideal for applying to large surface areas or the drench a surface with the JET setting. 

When not in use it is recommended that the cap is set to OFF.

  • The diptube on the FINGER SPRAY and TRIGGER SPRAYs requires trimming to size (apart from with the 1000ml bottles) and should be cut with a 45 degree angle. (remember to hold the diptube against the bottle and cut a little longer than you think you need it, so it can bend at the bottom of the bottle to get to all the liquid, and you can always trim a little more off, but you can't stick it back on)


£1.25 (£1.04 ex VAT)