Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
Evercool Twister PCI and Front Panel Fan Controller
SCB-CD2
11 In Stock
 INTRODUCTION
Evercool's Twister is a single fan controller with a front 3.5" case panel mount and a PCI slot mount so you can select where the controller goes
 FEATURES
•  Controller can be placed in the front 3.5¨ panel or on the PCI card slot
•  Fan speed can be easily adjusted by turning the control knob.
•  Suitable for all types of DC fans.
 COMPATIBILITY
front 3.5¨ panel OR on the PCI card slot
 SPECIFICATIONS
Overall Dimensions VDC Output Material
3.5" Bracket: 101 x 25 x 90mm
PCI Slot Mount: 120 x 24 x 45mm
12 5.5 - 10.5 v Aluminium
Steel
 PACKING DETAILS


£4.99 (£4.16 ex VAT)
Gelid PWM Y Cable, Connect two PWM fans to one socket
GEL-PWM-CABLE
323 In Stock
The PWM signal input from the mainboard is used to control a series of connected PWM fans for optimal performance in noise and cooling.

Connect two PWM fans to your mainboards CPU socket. Use multiple Y cables to connect a series of up to five PWM fans and provide as much extra cooling as desired.

Power drawn into your CPU cooler is adjusted depending on its temperature. An idle CPU does not generate as much heat, requires less active cooling, and hence slower fan speeds will be sufficient. Further this also reduces the overall ambient noise of your PC and it's handled automatically with little risk to your PC components.

While PWM fan controllers are very common in todays PC industry and available on most mainboards, there is often only one or two such PWM headers, reserved for the CPU and or the chipset fans. One way this excellent noise reduction idea can be extended to the numerous case fans inside a typical PC is by utilising a Gelid PWM Y Cable.

The long cable provide enough length to reach any location in your case.

£2.01 (£1.68 ex VAT)
Gelid Variable Fan Speed Controller
GEL-FAN-CONTROLLER
55 In Stock
Gelid's Fan Speed Controller allows for the RPM speed of any high RPM fan to be controlled from full speed (12V) to low speed (5V) manually. On the back of the controller there is an adhesive pad which allows for it to be secured in almost any location. The supplied cable is 500mm in length and therefore installation outside of the case is possible.

Specifications

Dimensions (mm) 62 (w) x 25 (h) x 19 (l)
Input Voltage (V) 12
Optimal Wattage (W) 12
Output Current (mA) max. 700
Output Voltage (V) 5 -12
Cable Length 500 mm
Warranty 24 months
£2.65 (£2.21 ex VAT)
Scythe Kaze Q 3.5inch Fan Controller, Black
KAZEQ-BL
17 In Stock
The Kaze Q Fan Controller is a very simple but effective fan controller. It is able to control the speed of up to four standard 3-pin fans (PWM fans are not compatible), while being installed in a 3½" drive bay. It has a voltage range of 5V to 12V and with its brushed aluminium finish it will look great inside any chassis.

Specifications

Model Name Kaze Q 3.5" Black
Dimensions 102 x 25 x 93 mm (WxHxD)
Length of Control Dials 12 mm
Voltage Range 5 V (±10%) - 12 V (±10%)
Fan Channels 4 (max. 1 Ampere / max. 12 W)
Fan Speed Range 0 - 9,900 rpm
Weight 116 g
Accessory 4x Fan Cable, Power Cable, Screws
Warranty 24 months
 
£13.25 (£11.04 ex VAT)