Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
Innovatek i7 CPU Coolers - Socket LGA 1366 (i7)
501508
1 In Stock
 The innovatek i7 CPU cooler has been specifically designed forSocket LGA 1366 and is designed for these CPUs and socket system that has been optimized. The massive Vollmetallkühler via mounting base (included) firmly bolted to the mainboard. By that, based on the G-flow, advanced interior design, the cooling significantly increased and marked the peak current Wasserkühltechnologie. The massive cooler weighs almost 700g and is about 10x10cm great!
Cooling
The i7 has been - like all innovatek cooler - on the optimal utilization of the coolant (cooling water) developed. Even at the lowest flow rates, it provides the maximum cooling capacity is available.Furthermore, the flow resistance of the i7 minimal. The CPU cooler, therefore no special requirements for pump or cooling system. The flow remains in each case fully, as the cooler during normal use can not clog.
Core Design
The extremely large core of the Cu-i7 cooler was designed for LGA 1366 socket CPUs and provides for a new dimension of cooling. The massive core is inextricably linked to the full housing of the cooler, and has a highly flat surface. Thus it is optimized for the CPU and carries the heat of the CPU very efficiently.
Quality
The processing and execution of the i7 cooler represents the highest standards and the design sets new standards. Clearly visible is the bottom of the cooler soil - at the core surface - as with all innovatek products - processed and high-class plan, which sets up a perfect contact with the CPU is guaranteed!
Features:
  • Maximum cooling capacity
  • Vollmetallausführung! (Full Metal)
  • Optimized for modern CPUs for Socket 1366
  • No cross-sectional narrowing in the cooler
  • Cooling beibt long-term fully preserved
  • Minimal pressure drop through the cooler
  • Full cooling at minimum flow from 0.3 l / min
  • You do not need a special pump
  • Easy and safe application
  • Optimized restraint system with secure mounting via screws
  • Absolutely fine and high quality optics in a metal-look

Specifications:

  • Weight: about 700g
  • Material: High purity copper
  • Holding System: Back Plate for screwing
  • Connections: 2x 1 / 4 inch for 8x1 tubes (replaceable)
Delivery:
  • Coolers assembled with base system
  • Thermal
  • Mounting instructions
  • Two 1 / 4 inch Male (8x1, straight, with soft gasket)
Note: Please use only distilled water in connection with innovatek Protect IP / PRO as a coolant! Avoid, however, the contact of the cooler with methanol (colloquial language Metylalkohol) or ethanol!This might damage the cooler irreparably! 
£87.11 (£72.59 ex VAT)