Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
Acousti AFG60B Anti-vibration 60mm Fan Gasket
AFG60B
1133 In Stock
These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis. These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! Fitting instructions Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.
£2.70 (£2.25 ex VAT)
Acousti AFG70B Anti-vibration 70mm Fan Gasket
AFG70B
133 In Stock

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis.

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Advantages

  • Help to absorb the vibration that otherwise would be transmitted from the fan into the case chassis and case housing.
  • Help to ‘seal’ the small gap between the fan and the casing/enclosure wall. This improves the efficiency of the fan, by reducing feedback airflow and therefore air pressure losses.

Other advantages include:

  • Compatible with virtually all case cooling fans
  • Supplied with screws and silicone washers
  • Quick and very easy to fit (these gaskets ‘hold onto’ the fan whilst fitting them due to a small lip in the gasket design)

Technical Spec

  • Operating Temperature: (-)20 - (+)70°C
  • Softness: Shore A 40 +/-5
  • Material: Translucent Silicon Rubber
  • Gasket Thickness: 2.5mm
  • Recommended Compression: 5% of height

Technical Drawing of 120mm Silicone Fan Gasket. The silicone for the gasket is 2.5mm thick, and the silicone for the washer is 2.0mm thick.

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Fitting Directions

  1. Fit the fan gasket onto the outside of the fan housing (it will stay on the fan)
  2. Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side
  3. Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw
  4. Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.

Animation showing a vibration-reducing silicone fan gasket fitted to a standard case cooling fan, and fastened into position with a screw and external silicone washer.

Effective? - Yes, these are simply the most effective yet!

Why are these silicone fan gaskets especially effective? Because Acousti Products have not held back on the silicone thickness and the silicone material softness. All gaskets are 2.5mm thick (not just 1mm like alternatives), and Shore A 40 (a great deal softer than others we have tested). We are confident that these two factors make these gaskets more effective than any other models available.

£2.82 (£2.35 ex VAT)
Acousti AFG80B Anti-vibration 80mm Fan Gasket
AFG80B
1389 In Stock

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis.

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Advantages

  • Help to absorb the vibration that otherwise would be transmitted from the fan into the case chassis and case housing.
  • Help to ‘seal’ the small gap between the fan and the casing/enclosure wall. This improves the efficiency of the fan, by reducing feedback airflow and therefore air pressure losses.

Other advantages include:

  • Compatible with virtually all case cooling fans
  • Supplied with screws and silicone washers
  • Quick and very easy to fit (these gaskets ‘hold onto’ the fan whilst fitting them due to a small lip in the gasket design)

Technical Spec

  • Operating Temperature: (-)20 - (+)70°C
  • Softness: Shore A 40 +/-5
  • Material: Translucent Silicon Rubber
  • Gasket Thickness: 2.5mm
  • Recommended Compression: 5% of height

Technical Drawing of 120mm Silicone Fan Gasket. The silicone for the gasket is 2.5mm thick, and the silicone for the washer is 2.0mm thick.

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Fitting Directions

  1. Fit the fan gasket onto the outside of the fan housing (it will stay on the fan)
  2. Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side
  3. Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw
  4. Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.

Animation showing a vibration-reducing silicone fan gasket fitted to a standard case cooling fan, and fastened into position with a screw and external silicone washer.

Effective? - Yes, these are simply the most effective yet!

Why are these silicone fan gaskets especially effective? Because Acousti Products have not held back on the silicone thickness and the silicone material softness. All gaskets are 2.5mm thick (not just 1mm like alternatives), and Shore A 40 (a great deal softer than others we have tested). We are confident that these two factors make these gaskets more effective than any other models available.

£3.04 (£2.53 ex VAT)
Acousti AFG92B Anti-vibration 92mm Fan Gasket
AFG92B
1221 In Stock

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis.

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Fitting instructions

 

  1. Fit the fan gasket onto the outside of the fan housing (it will stay on the fan)
  2. Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side
  3. Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw
  4. Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.
£3.99 (£3.33 ex VAT)
Acousti AFM02B OEM Ultra-Soft Flush-Fit Fan Mounts qty 100 (25 fans)
OEM-AFM02B
214 In Stock

Why are Fan Mounts Necessary?

Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted 'vibrational' noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins.

To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount.

These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application.

Compatibility

Please note that this product is only compatible with flange type fans. This is because flange type fans do not have a 'tunnel' connecting the mounting holes like Rib type fans. Flange type design is the most popular type of fan moulding used in PCs & servers.

Specifications

  Fan Mounts OEM Fan Mounts
Fan Type Designed to fit Flange Type fans
Range of Fan Mounting Holes 4.0 - 5.25mm diameter
Range of Case Mounting Holes 4.0 - 5.5mm diameter
Length 26mm, Largest Diameter:8.0mm
Max. Elongation >100%
Colour Matt Black
Material Ultra-Soft Silicone Dampening Polymer
Toxicity Non-toxic
Normal Operating Temperature Range (-)20°C to (+)70°C
£22.74 (£18.95 ex VAT)
Acousti AFM02B Ultra-Soft Flush-Fit Fan Mounts, qty 8 (2 fans)
AFM02B
3043 In Stock
 

Why are Fan Mounts Necessary?

Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted 'vibrational' noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins.

To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount.

These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application.

Compatibility

Please note that this product is only compatible with flange type fans. This is because flange type fans (shown below) do not have a 'tunnel' connecting the mounting holes like Rib type fans. Flange type design is the most popular type of fan moulding used in PCs & servers.

£3.99 (£3.33 ex VAT)
Acousti AFM03B OEM Ultra-Soft Easy-Fit Fan Mounts qty 100 (25 fans)
OEM-AFM03B
5 In Stock

Why are Fan Mounts Necessary?

Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted 'vibrational' noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins.

To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount.

These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application.

Compatibility

Please note that this product is only compatible with flange type fans. This is because flange type fans (shown below) do not have a 'tunnel' connecting the mounting holes like Rib type fans. Flange type design is the most popular type of fan moulding used in PCs & servers.

£24.93 (£20.78 ex VAT)
Acousti AFM03B Ultra-Soft Easy-Fit Fan Mounts, qty 8 (2 fans)
AFM03B
17 In Stock
Why are Fan Mounts Necessary?
Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted 'vibrational' noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins.
To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount.
These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application.
£3.99 (£3.33 ex VAT)
Acousti OEM-AFG120B 32 Black Anti-vibration 120mm Fan Gaskets
OEM-AFG120B
120 In Stock
These super-soft, super-thick silicone fan gaskets are the softest, thickest and most effective fan gasket available. They are much thicker than any competing product we know of, and are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a unique thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis. The result? Much less noise! Advantages Help to absorb the vibration that otherwise would be transmitted from the fan into the case chassis and case housing. Help to 'seal' the small gap between the fan and the casing/enclosure wall. This improves the efficiency of the fan, by reducing feedback airflow and therefore air pressure losses. Other advantages include: Compatible with virtually all case cooling fans Supplied with screws and silicone washers Quick and very easy to fit (these gaskets 'hold onto' the fan whilst fitting them due to a small lip in the gasket design) Technical Spec Operating Temperature: -20 to +70C Softness: Shore A 25 5 Material: Silicone Rubber Gasket Thickness: 2.5mm Recommended Compression: 5% of height These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! Fitting Directions Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten. Effective? - Yes, these are simply the most effective yet! Why are these silicone fan gaskets especially effective? Because Acousti Products have not held back on the silicone thickness and the silicone material softness. We are confident that these gaskets are more effective than any other models available.
£91.91 (£76.59 ex VAT)
Akasa AK-MX003 Silicone Fan Pins (5 FANS)
AK-MX003
-11 In Stock
 Anti-vibration siliconized rubber pins
 Quick and tool free case fans mounting
 20 pcs for easy installation of five fans

Rubber pins 20 pieces (for five fans)
Compatiblity All popular case fans
Colour Black
Material Siliconized rubber
£3.99 (£3.33 ex VAT)
Out of Stock
Evercool HDD and fan anti-vibration Kit UVS-01
ECUVS-01
In Stock
 INTRODUCTION
Anti vibration washer/ screw sets for 2.5 and 3.5 inch HDD's and rubber fan mounts for open and closed fan types to reduce vibration related noise from your case.
 FEATURES
• 12 rubber fan mounts for closed chassis fan
• 12 rubber fan mounts for open chassis fan
• 8 rubber foot screws for 3.5" HDD
• 8 rubber foot screws for 2.5" HDD
 PACKING DETAILS

£9.76 (£8.13 ex VAT)