Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
Acousti AcoustiFeet Soft Anti-Vibration Feet ACF3007-20B
ACF3007-20B
3608 In Stock

Anti-vibration Replacement Soft Feet (Pack of 4)

A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the substrate, the PC can generate annoying noise elsewhere (secondary noise).

We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights) and in two colours. These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations.

A little extreme? Well, yes, perhaps: but even with very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference - check out the feedback & reviews from customers below!

Multiple Applications

Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits.

£3.70 (£3.08 ex VAT)
Acousti AcoustiPack BLOCKS Acoustic Foam Blocks
AP-BLOCKS
13 In Stock

The new AcoustiPack™ EXTRA Foam Blocks pack contains three acoustic foam blocks. These can be used inside any vacant drive bays to help increase the absorption of unwanted sound energy. Once installed, the foam blocks also help to reduce the internal air volume inside your PC or server case, which in turn may improve airflow velocity and cooling performance.

The blocks are made from profession-grade dense acoustic foam, which is certified to UL94-HF1 fire rating. The foam is especially effective at absorbing sound at higher-frequency, such as HDD whine, or high-pitch noise from motherboard components. The foam is black, and flexible enough to squeeze into empty 5¼" or 3½" drive bays to pressure-fit.

  1. Additional foam blocks help to increase surface area inside a case
  2. Pack contains a set of 3 noise-absorbing foam blocks
  3. Two blocks suitable for empty optical 5.25 drive bays
  4. One block suitable for an empty HDD or FDD drive bay
£14.60 (£12.17 ex VAT)
Acousti AcoustiPack EXTRA Single 3-layer Acoustic Sheet
AP-SHEET
0 In Stock

The new range of AcoustiPack™ sound-proofing kits has been designed with customer's pockets and greater flexibility in mind! As a result, Acousti have introduced AcoustiPack™ EXTRA Sheet (7mm), which is a single large sheet of their latest generation 3-layer acoustic material (as found in ULTIMATE). This sheet is ideal if additional materials are required for a particular project, and the space allows for a 7mm sheet to be added. This product makes the range of acoustic material kits more flexible, and can help to save money and waste when an entire kit, such as ULTIMATE or LITE is not necessary.

Specifications

Manufacturer Acousti Products
Product name AcoustiPack Multi-layer 3L12
Product code APML-3L12
Colour Dark grey/black
Composition Triple-layer acoustic composite
Installation method Self-adhesive backing
Thickness 12mm
Dimensions 457 x 431 mm (17 x 18 inches)
Total sheet area 0.197m² (2.13 ft²)
Weight 1230g (43 oz)
Material weight per unit area 6.24 kg/m² (1.26 lb/ft²) ±10%
Normal operating temperature 0°C-93°C (32°F-200°F)
Flammability certification UL94-V0 (UKAS Accredited)
RoHS certified Yes
Packaging Bulk OEM

£17.72 (£14.77 ex VAT)
Out of Stock
Acousti AcoustiPack LITE 2-layer Material Kit
APL
41 In Stock

AcoustiPack™ LITE

AcoustiPack™ LITE is a cost-effective multi-layer soundproofing materials kit for standard and small size computer cases, including HTPCs and small form-factor (SFF) cases. Each pack contains two large sheets of sound-proofing materials made from a unique 4mm (2-layer) acoustic composite. This material is ideal for fitting within the narrow confines of modern enclosures, yet it has superb noise reduction capabilities.

The upper layer (immediately opposite the noise source), is a layer of semi-open-cell dense acoustic foam which provides a low-reflection surface. This upper layer of foam provides some sound attenuation, especially of higher-frequency sound (above 1kHz). The very dense black limp 'plastic' layer at the base of the 2-layer material is directly attached to the substrate. This layer acts as both an acoustic barrier (effectively attenuating the transmission of sound energy through the material) and a damping layer, reducing vibration in the substrate (usually a thin steel panel in many PCs and server enclosures).

£21.95 (£18.29 ex VAT)
Acousti AcoustiPack ML 2-layer 4mm OEM Material
APML-2L4
440 In Stock
Features
  • Bulk sheets of 2-layer acoustic material, sold singly
  • Designed for PC system builders or industrial applications
  • Material sheet is dual-layer acoustic composite, 4mm thick
  • Dimensions are 431 x 457mm (17" x 18")
  • Highly acoustically effective and cost effective

Specifications

Manufacturer Acousti Products
Product name AcoustiPack Multi-layer 2L4
Product code APML-2L4
Colour Dark grey/black
Composition Dual-layer acoustic composite
Installation method Self-adhesive backing
Thickness 3.8mm
Dimensions 457 x 431 mm (17 x 18 inches)
Total sheet area 0.197m² (2.13 ft²)
Weight 398g (14 oz)
Material weight per unit area 2.07 kg/m² (0.42 lb/ft²) ±10%
Normal operating temperature 0°C-93°C (32°F-200°F)
Flammability certification UL94-V0 (UKAS Accredited)
RoHS certified Yes
Packaging Bulk OEM
Warranty 24 months
£9.89 (£8.24 ex VAT)
Acousti AcoustiPack ML 3-layer 12mm OEM Material
APML-3L12
156 In Stock
Manufacturer Acousti Products
Product name AcoustiPack Multi-layer 3L12
Product code APML-3L12
Material code SA6.4F2B6.4F
Colour Dark grey/black
Composition Triple-layer acoustic composite
Installation method Self-adhesive backing
Thickness 12mm
Dimensions 457 x 431 mm (17 x 18 inches)
Total sheet area 0.197m² (2.13 ft²)
Weight 1230g (43 oz)
Material weight per unit area 4.54 kg/m² (0.93 lb/ft²) ±10%
Foam type Open cell
Normal operating temperature 0°C-93°C (32°F-200°F)
Flammability certification UL94-V0 (UKAS Accredited)
RoHS certified Yes
Packaging Bulk OEM
£20.41 (£17.01 ex VAT)
Acousti AcoustiPack ML 3-layer 7mm OEM Material
APML-3L7
313 In Stock
Features
  • Bulk sheets of 3-layer acoustic material, sold singly
  • Designed for PC system builders or industrial applications
  • Material sheet is triple-layer acoustic composite, 7mm thick
  • Dimensions are 431 x 457mm (17" x 18")
  • Highly acoustically effective and cost effective

Specifications

Manufacturer Acousti Products
Product name AcoustiPack Multi-layer 3L7
Product code APML-3L7
Colour Dark grey/black
Composition Triple-layer acoustic composite
Installation method Self-adhesive backing
Thickness 6.9mm
Dimensions 457 x 431 mm (17 x 18 inches)
Total sheet area 0.197m² (2.13 ft²)
Weight 454g (16 oz)
Material weight per unit area 2.28 kg/m² (0.47 lb/ft²) ±10%
Normal operating temperature 0°C-93°C (32°F-200°F)
Flammability certification UL94-V0 (UKAS Accredited)
RoHS certified Yes
Packaging Bulk OEM
Warranty 24 months
£13.17 (£10.98 ex VAT)
Acousti AcoustiPack ULTIMATE Triple-Layer Material Kit
APU
36 In Stock

AcoustiPack™ ULTIMATE

AcoustiPack™ ULTIMATE sets a new standard for PC soundproofing material kits, where maximum noise reduction is required in a limited space. This multi-layer materials kit includes three sheets; two 2-layer (4mm thick) sheets and one 3-layer sheet made from Acousti's latest generation materials, providing superb levels of noise reduction despite the thickness being only 7mm. This soundproofing kit is designed to reduce the noise emanating from noisy PCs with case sizes ranging from standard ATX up to larger E-ATX and even pedestal server cases used by gamers, power-users and small business users.

In AcoustiProducts' latest generation of 3-layer composite, the dense acoustic barrier layer has been 'suspended' away from the substrate in the centre of the acoustic foam. The construction layering is like this: (noise source) acoustic foam -> acoustic barrier -> acoustic foam (then the substrate, which is usually a metal sheet panel).

Sound energy first hits the upper foam surface, which is similar to the 2-layer construction, in that it is a low-reflective soundproofing material which is particularly effective at absorbing high frequencies. The sound energy then encounters the central suspended barrier layer, which is decoupled from the substrate. This high-density high-mass layer acts as an acoustic barrier mass to the transmission of energy through the material. The third layer of foam acts to suspend the barrier layer a small distance away from the substrate. AcoustiProducts' engineers found from both small scale impedance tube and larger scale reverberation chamber acoustic tests that the suspended central acoustic barrier effectively increases the absorption of low frequency noise (under 1kHz). This may well be a result of the 'mass-spring effect', where low frequency energy is absorbed by the sound 'moving' the layer when it is excited by certain resonant frequencies.

£36.75 (£30.63 ex VAT)
Acousti AFG-PSU Anti-vibration Power Supply Gasket
AFG-PSU
-48 In Stock
Silicone gaskets are an excellent way to prevent vibration being transmitted into your PC case and have long been accepted as a very effective way of mounting fans to reduce noise. Now, we are pleased to present a gasket which is specifically designed for a PC power supply. It is specially moulded from super-soft silica gel in order to fit around the rear of any ATX power supply unit, and will drastically reduce low-frequency vibrational noise caused by the PSU fan. It also gives protection to the power supply to protect it from physical shock.
In addition, the package contains eight screws and silica gel washers which can be used as an alternative mounting method for your power supply, or for mounting additional power supplies in other machines or other items such as hard drives.

Super-soft silica gel gasket eliminates power supply fan vibration
Significantly reduces low frequency noise level
Easy to install and transferable when you upgrade your PSU
Protects fan and power supply from physical shock
Includes 8 x screws/soft washers for alternative/additional mountings


Specifications

Dimensions (W x H x D) 152 x 88 x 10 mm
Weight 40 g
Compatibility ATX PSU (any fan position)
Other items included 8 x screws and 8 x soft silica gel washers
Gasket Thickness 3.0mm
Operating Temperature -20 to +70°C
Softness Shore A 25 ± 5
Material Black Silicone Rubber
£5.94 (£4.95 ex VAT)
Out of Stock
Acousti AP-1003W-C Clear Anti-Vibration Silicone Washers (1000 pcs)
OEM-AP-1003W-C
60 In Stock
Although many PC components create noise in themselves, this can be made much worse when components are installed into a PC case, and their noise can become amplified by vibration of the metal onto which the component is mounted. These soft silicone general-purpose washers seek to reduce or eliminate this vibration effect, which often manifests itself as a deep, annoying rumbling sound. Simply put one washer between the device and the metal panel onto which it is mounted, then put another washer onto the screw so it sits under the screw head, then screw the device into place. The silicone washers will sit on either side of the metal panel, and significantly reduce the amplified vibrational noise from the fan, drive or power supply. Easy! The washers are available in retail packs of 8 and OEM packs of 1000. 8 washers are needed to mount one fan/PSU/HDD/ODD, or 1000 washers can be used to mount 125 devices. If you decide to use only 4 washers per device, they will go twice as far, but the sound deadening effect may be lessened.
£53.93 (£44.94 ex VAT)
Acousti AP-1003W-C Clear Anti-Vibration Silicone Washers (pack of 8)
AP-1003W-C
152 In Stock
Although many PC components create noise in themselves, this can be made much worse when components are installed into a PC case, and their noise can become amplified by vibration of the metal onto which the component is mounted. These soft silicone general-purpose washers seek to reduce or eliminate this vibration effect, which often manifests itself as a deep, annoying rumbling sound. Simply put one washer between the device and the metal panel onto which it is mounted, then put another washer onto the screw so it sits under the screw head, then screw the device into place. The silicone washers will sit on either side of the metal panel, and significantly reduce the amplified vibrational noise from the fan, drive or power supply. Easy! The washers are available in retail packs of 8 and OEM packs of 1000. 8 washers are needed to mount one fan/PSU/HDD/ODD, or 1000 washers can be used to mount 125 devices. If you decide to use only 4 washers per device, they will go twice as far, but the sound deadening effect may be lessened.
£0.87 (£0.73 ex VAT)
AcoustiFeet BLACK anti-vibration (FIRM) <30Kg
ACF3007-30B
3958 In Stock

Anti-vibration Replacement Firm Feet (Pack of 4)

A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the substrate, the PC can generate annoying noise elsewhere (secondary noise).

We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights) and in two colours. These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations.

A little extreme? Well, yes, perhaps: but even with very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference - check out the feedback & reviews from customers below!

Multiple Applications

Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits.

£3.70 (£3.08 ex VAT)
Akasa noise reduction kit AK-MX002
AK-MX002
-547 In Stock
 Silencing gasket separates the PSU from the chassis
 PSU mounting screws with soft washers
 Siliconized rubber pins for anti-vibration case fans mounting

Dimension 8 pieces (for two fans)
PSU gasket 1
PSU mounting screws 4 (soft washers pre-applied)
£3.58 (£2.98 ex VAT)
Out of Stock
Evercool HDD and fan anti-vibration Kit UVS-01
ECUVS-01
In Stock
 INTRODUCTION
Anti vibration washer/ screw sets for 2.5 and 3.5 inch HDD's and rubber fan mounts for open and closed fan types to reduce vibration related noise from your case.
 FEATURES
• 12 rubber fan mounts for closed chassis fan
• 12 rubber fan mounts for open chassis fan
• 8 rubber foot screws for 3.5" HDD
• 8 rubber foot screws for 2.5" HDD
 PACKING DETAILS

£9.76 (£8.13 ex VAT)