Home Delivery Contact Us Password Reminder Register
Your Basket

Your Basket: £0.00 (0 Items)
Total:

Shop by Category
Newsletter Signup
Your Name:

Email Address:

Order by:
Arctic Silver Alumina ADHESIVE Thermal Paste
ASAA
In Stock

Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride.

Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capacitive.

A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams of adhesive (2.5 grams each of parts
A and B) and a plastic reusable mixing wand. (Approximately 3cc total adhesive.)

Although lighter per set than Arctic Silver Adhesive due to its use of ceramics rather than silver, each set of Arctic Alumina Adhesive 
contains the same amount of adhesive by volume as a set of Arctic Silver adhesive and will cover the same area.

CAUTION! 
Arctic Alumina Thermal Adhesive is a permanent adhesive.
Any components you attach together with Arctic Alumina Thermal Adhesive will stay attached forever.

Arctic Alumina Thermal Adhesive should be kept cold and away from UV light (sunlight and florescent lighting).
We recommend refrigerating the unused material and allowing it to come to room temperature prior to use.

£8.29 (£6.91 ex VAT)
Arctic Silver Alumina Thermal Paste 1.75g
ASA17
In Stock

Made with micronized aluminum oxide and boron nitride:
Arctic Alumina uses a layered composite of three unique shapes and sizes of ceramic particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled triple phase viscosity:
Arctic Alumina does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Alumina's consistency is engineered for easy application in a thin even layer. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
NOTE: (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Alumina goes through are much more subtle and ultimately much more effective.)

Absolute Stability:
Arctic Alumina will not separate, run, migrate, or bleed.

Electrical Insulator:
Arctic Alumina Compound is a pure electrical insulator, neither electrically conductive nor capacitive.

Clean Up:
Arctic Alumina Compound cleans off easily from CPUs and heatsinks. In most cases, simply wiping with a dry cloth will easily remove the compound from the CPU and heatsink.

Arctic Alumina is sold in:
1.75 gram tubes. 
(A bit more than 1cc) This is enough compound to cover at least 25 to 35 small CPU cores, or 9 to 15 large CPU cores, or 4 to 8 heat plates. At a layer 0.003" thick, one tube will cover approximately 24 square inches.

3.5 gram tubes. 
(About 2.2cc) At a layer 0.003" thick, one tube will cover approximately 48 square inches.

14 gram tubes 
(About 9cc) At a layer 0.003" thick, one tube will cover approximately 192 square inches.

Compliancy:
RoHS Comliant.

£2.99 (£2.49 ex VAT)
Arctic Silver Alumina Thermal Paste 14g
ASA14G
In Stock

Made with micronized aluminum oxide and boron nitride.
Arctic Alumina uses a layered composite of three unique shapes and sizes of ceramic particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled triple phase viscosity.

Arctic Alumina does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Alumina's consistency is engineered for easy application in a thin even layer. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
NOTE: (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Alumina goes through are much more subtle and ultimately much more effective.)

Absolute Stability.

Arctic Alumina will not separate, run, migrate, or bleed.

Electrical Insulator.

Arctic Alumina Compound is a pure electrical insulator, neither electrically conductive nor capacitive.

Thermal conductivity: 
>4.0 W/mK   (Hot Wire Method Per MIL-C-47113)

Thermal Resistance:
  <0.010°C-in2/Watt   (0.001 inch layer)

Extended temperature limits:   – 40°C to >180°C

Lower full load core temperatures:

2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads.
When measured with a calibrated thermal diode imbedded in the CPU core.


Clean Up :
Arctic Alumina Compound cleans off easily from CPUs and heatsinks. In most cases, simply wiping with a dry cloth will easily remove the compound from the CPU and heatsink.

Arctic Alumina is sold in:
1.75 gram tubes. 
(A bit more than 1cc) This is enough compound to cover at least 25 to 35 small CPU cores, or 9 to 15 large CPU cores, or 4 to 8 heat plates. At a layer 0.003" thick, one tube will cover approximately 24 square inches.

3.5 gram tubes. 
(About 2.2cc) At a layer 0.003" thick, one tube will cover approximately 48 square inches.

14 gram tubes 
(About 9cc) At a layer 0.003" thick, one tube will cover approximately 192 square inches.

£6.99 (£5.83 ex VAT)
Arctic Silver AS5 12g, High-Density Polysynthetic Silver Thermal Compound
ACSILVER5-12G
In Stock

 

Arctic Silver 5 Thermal Paste 12g

Features:

Contains 99.9% pure silver:
Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.

High-Density:
Arctic Silver 5 contains over 88% thermally Conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.

 

If you are ordering in bulk, drop us an email to confirm dispatch times, contact us for pricing on larger quantities.



Controlled Triple-Phase Viscosity:
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)

Not Electrically Conductive:
Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)

Absolute Stability:
Arctic Silver 5 will not separate, run, migrate, or bleed.

£15.20 (£12.67 ex VAT)
Arctic Silver AS5 3.5g, High-Density Polysynthetic Silver Thermal Compound
ARCTICSILVER5
In Stock

  Arctic Silver 5 Thermal Paste 3.5g

Features:

Contains 99.9% pure silver:

Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.


High-Density:
Arctic Silver 5 contains over 88% thermally Conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.
 

 AS5

If you are ordering in bulk, drop us an email to confirm dispatch times, contact us for pricing on larger quantities.

Controlled Triple-Phase Viscosity:
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)


Not Electrically Conductive:
Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)


Absolute Stability:
Arctic Silver 5 will not separate, run, migrate, or bleed.

£4.99 (£4.16 ex VAT)
Arctic Silver Ceramique 2 2.7g, Tri-Linear Ceramic Thermal Compound
AS-CERAMIQUE2
In Stock
 Tri-Linear Ceramic Content:
Like the original Céramique, Céramique 2 uses only ceramic fillers so it is neither electrically conductive nor capacitive. The tri-linear composite of aluminum oxide, zinc oxide and boron nitride allows the thinnest possible bond line with modern processors, heatsinks and electronics. Critically-sized particles and new ultra-high shear mixing techniques maximize Céramique 2's thermal performance and help maintain a stable homogenous suspension. This exclusive combination provides performance exceeding most metal based compounds.
Polysynthetic Suspension Fluid:
A new oil mixture, improved thermal filler properties and increased particle deagglomeration, dispersal and density enhance Céramique 2's thermal performance and overall stability. The third generation polysynthetic suspension fluid combines advanced synthetic oils to maximize wetting and stability while allowing a higher density of thermally conductive fillers.
Excellent Stability: 
Céramique 2 is engineered to not separate, run, migrate, or bleed.
Electrical Insulator:
Céramique 2 does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.
Performance:
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Innovative Dispenser:
The amount of compound remaining in the 2.7-gram syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.

Easy Clean Up:
Céramique 2 can easily be cleaned from CPUs and heatsinks with ArctiClean, isopropyl alcohol or any of the cleaners listed in the product instructions.

Instructions:
 
Specifications:

Average Particle Size:
<0.36 micron <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch.)
Temperature Limits:
Peak: –150°C to >185°C Long-Term: –150°C to 130°C
Coverage Area:

2.7-gram syringe. (Approximately 1cc) 
At a layer 0.003" thick, one syringe will cover about 22 square inches.

Important Reminder:
Due to the unique shapes and sizes of the particles in Céramique 2, it will take a minimum of 25 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode, the measured temperature will often drop slightly over this "break-in" period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.
£3.35 (£2.79 ex VAT)
Arctic Silver Ceramique 2 25g, Tri-Linear Ceramic Thermal Compound
ASCERAMIQUE225G
In Stock
  Tri-Linear Ceramic Content:
Like the original Céramique, Céramique 2 uses only ceramic fillers so it is neither electrically conductive nor capacitive. The tri-linear composite of aluminum oxide, zinc oxide and boron nitride allows the thinnest possible bond line with modern processors, heatsinks and electronics. Critically-sized particles and new ultra-high shear mixing techniques maximize Céramique 2's thermal performance and help maintain a stable homogenous suspension. This exclusive combination provides performance exceeding most metal based compounds.
Polysynthetic Suspension Fluid:
A new oil mixture, improved thermal filler properties and increased particle deagglomeration, dispersal and density enhance Céramique 2's thermal performance and overall stability. The third generation polysynthetic suspension fluid combines advanced synthetic oils to maximize wetting and stability while allowing a higher density of thermally conductive fillers.
Excellent Stability: 
Céramique 2 is engineered to not separate, run, migrate, or bleed.
Electrical Insulator:
Céramique 2 does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.
Performance:
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Innovative Dispenser:
The amount of compound remaining in the 2.7-gram syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.

Easy Clean Up:
Céramique 2 can easily be cleaned from CPUs and heatsinks with ArctiClean, isopropyl alcohol or any of the cleaners listed in the product instructions.

Instructions:
 
Specifications:

Average Particle Size:
<0.36 micron <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch.)
Temperature Limits:
Peak: –150°C to >185°C Long-Term: –150°C to 130°C
Coverage Area:
25-gram syringe. (Approximately 9.2cc) 
At a layer 0.003" thick, one syringe will cover about 200 square inches.
Important Reminder:
Due to the unique shapes and sizes of the particles in Céramique 2, it will take a minimum of 25 hours and several thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode, the measured temperature will often drop slightly over this "break-in" period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired.
£7.00 (£5.83 ex VAT)
Arctic Silver Premium Silver Thermal Adhesive
AS-SILVER-ADHESIVE
In Stock

Silver Adhesive Features:

Made with 99.8% pure micronized silver.
62% to 65% silver content by weight.
Superior thermal conductivity. Greater than 7.5 W/mK

Temperature range:
- 40C to >150C
(Bond strength is weakened at temperatures
below 0C due to crystallization.)

Negligible electrical conductivity.
Arctic Silver Thermal Adhesive was formulated to
conduct heat, not electricity.
NOTE: Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be keep away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause
problems if it bridged two close-proximityelectrical paths.

Arctic Silver Thermal Adhesive is sold in:
A set of Arctic Silver Thermal Adhesive consists of two tubes containing a total of 7 grams of adhesive
(3.5 grams of Part A and 3.5 grams of Part B) and a plastic reusable mixing wand.

CAUTION!

Arctic Silver Thermal Adhesive is a permanent adhesive. Components you attach with
Arctic Silver Thermal Adhesive will stay attached forever.

£11.99 (£9.99 ex VAT)
Cooler Master HTK-002 High Performance PC Thermal Paste
HTK-002-U1-GP
-132 In Stock

Cooler Master HTK-002 thermally conductive compounds are grease-like silicone materials, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 177 C (350 F), maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.


Features

•Suitable for CPU, chipsets on Mainboard, VGA card, etc.
•Easy to use
•Zif Socket Templates ensure correct applying area with various CPU socket types.
•Produces an even layer when using applicator.
•Dielectric.
•Wide range of application temperature.

Color Gray
Viscosity (@25°C) 1400 P
Specific Gravity 2.63 g/cm3
Bulk Thermal Conductivity >4.5 W/m-K
Thermal Impedance ~0.02 C-in/W
Volume Resistivity 5.0 x 10^15

£2.19 (£1.83 ex VAT)
Out of Stock
Coollaboratory Liquid COPPER thermal paste
CLL-COPPER
26 In Stock

Coollaboratory Liquid Copper – the high-end-heat conduction paste for all operation purposes!

The Coollaboratory Liquid Copper is a high-end- heat conduction paste for the usage on all materials. The heat conduction paste consists of a complex matrix of silicone with quality like in industry applications and also high-purity micro-copper particles (99,9%).

The used matrix of silicone is high resistant towards temperatures over 800 Grad Celsius and is with this property better than similar heat conduction pastes where performance and durability is concerned. Through its texture the new Coollaboratory Liquid Copper can be applied very easy on the contact surfaces of the heat sources and also on coolers and is even usable without problems for uneven surfaces and cooler with Direct-Touch-Technology.

Whether computer, notebook or even gaming console – the Coollaboratory Liquid Copper is the ideal partner for the cooling!

The Liquid Copper is delivered in a blister package with a plastic card for easy application and a trilingual manual. It contains 1 ml heat conduction paste.

£4.99 (£4.16 ex VAT)
Coollaboratory Liquid Metal Pad kit 3 x CPU 1 x Clean Kit
i-502251
20 In Stock
Pack contains 3 x CPU MetalPad 38mm x 38mm and 1 x Cleaning Kit

The "Liquid Coollaboratory MetalPad" is the first metallic thermal pad, which, with only a slight warming (BurnIn) melts and thus produces an optimum heat transfer. It consists of 100% metal alloy, thus enabling a superior heat transfer with minimal effort for installation and a possible subsequent removal.
 
 A simple, clean and quick installation make it the ultimate heat conducting liquid MetalPad for high-end PCs. The Liquid MetalPad can at all on the Kühlermarkt contained materials such as aluminum or copper are used. It does not age and does not need to be changed regularly. The Coollaboratory Liquid MetalPad is RoHS compliant and completely non-toxic.

Full details
£10.99 (£9.16 ex VAT)
Coollaboratory Liquid Metal Pad kit 3 x GPU 1 x Clean Kit
i-501250
5 In Stock
Pack contains 3 x GPU MetalPad 20mm x 20mm and 1 x Cleaning Kit

The "Liquid Coollaboratory MetalPad" is the first metallic thermal pad, which, with only a slight warming (BurnIn) melts and thus produces an optimum heat transfer. It consists of 100% metal alloy, thus enabling a superior heat transfer with minimal effort for installation and a possible subsequent removal.
 
 A simple, clean and quick installation make it the ultimate heat conducting liquid MetalPad for high-end PCs. The Liquid MetalPad can at all on the Kühlermarkt contained materials such as aluminum or copper are used. It does not age and does not need to be changed regularly. The Coollaboratory Liquid MetalPad is RoHS compliant and completely non-toxic.

Full details
£9.21 (£7.68 ex VAT)
Coollaboratory Liquid Metal thermal Pad 1 x GPU
I-501248
10 In Stock
Pack contains 1 x GPU MetalPad 20mm x 20mm

The "Liquid Coollaboratory MetalPad" is the first metallic thermal pad, which, with only a slight warming (BurnIn) melts and thus produces an optimum heat transfer. It consists of 100% metal alloy, thus enabling a superior heat transfer with minimal effort for installation and a possible subsequent removal.
 
 A simple, clean and quick installation make it the ultimate heat conducting liquid MetalPad for high-end PCs. The Liquid MetalPad can at all on the Kühlermarkt contained materials such as aluminum or copper are used. It does not age and does not need to be changed regularly. The Coollaboratory Liquid MetalPad is RoHS compliant and completely non-toxic.

Full details
£5.63 (£4.69 ex VAT)
Coollaboratory Liquid PRO thermal paste and cleaning kit
I-501163
11 In Stock
Coollaboratory Liquid Pro is the first heat conducting medium, which is worthy of its name. It is the first heat conduction paste that consists of 100% liquid metal alloy. It is liquid at room temperature (like mercury), but it is absolutly nontoxic and has a high moistening ability for several materials. The Coollaboratory Liquid Pro is especially recommend for nickel-plated copper.

Coollaboratory Liquid Pro contain no non-metallic additives (like silicone, oxides etc.) at all. It also does not contain any solid particles. Due to these properties, Coollaboratory Liquid Pro surpasses the best high performance heat conducting pastes by a multiple. 

Full Details
£6.49 (£5.41 ex VAT)
Coollaboratory Liquid ULTRA thermal paste and cleaning kit
501549
5 In Stock

Coollaboratory's Liquid Ultra is optimized for maximum performance and optimal usability.

The Liquid Ultra is 100% metal, but has a much better usability and a herausrragende performance. It can be very easy to apply with the included brush.
The processor (heat spreader) should be cleaned thoroughly before applying the Liquid Ultra removing all traces of old thermal grease.

NOTE: Not suitable for aluminum.
Features:

  • 100% Metal
  • Extreme performance
  • Simple to use

Delivery:

  • 0.15 ml Coollaboratory Liquid Ultra
  • Cleaning Set
  • Two brushes
  • Instructions
£6.99 (£5.83 ex VAT)
Gelid GC-3 10g Extreme Performance Thermal Compound
GEL-GC-EXTREME-10G
75 In Stock
Created for Extreme users, the GC-Extreme thermal compound achieves the best heat conductivity possible between your CPU, VGA or even Chipset to your cooler as the GC-Extreme has a more fluid-like consistency than most other thermal pastes. It's low viscosity allows it to be spread more easily and thinly for optimal efficiency.

1.Ultimate Heat Conductivity
2.Non-Electrical Conductive
3.Non-Corrosive, Non-Curing and Non-Toxic
4.No Bleeding and user friendly
5.GELID Applicator Supplied
GC-3 10g Extreme
Density (g/cm3) 3.73
Thermal conductivity (W/mK) 8.5
Viscosity (Centipoise) 85000
Net Content 10g
Warranty 24 months
EAN barcode 4897025780583

£19.62 (£16.35 ex VAT)
Gelid GC-3 3.5g Extreme Performance Thermal Compound
GEL-GC-EXTREME
235 In Stock
Created for extreme users; the GC-Extreme thermal compound (3.5g) achieves the best heat conductivity from your CPU, VGA or even Chipset. The GELID applicator enables an easier application.

Specifications

Density (g/cm3) 3.73
Net Content (g) 3.5
Thermal conductivity (W/mK) 8.5
Viscosity (Centipoise) 85000
Warranty 24 months
£7.55 (£6.29 ex VAT)
Gelid GC-4 7g Supreme Enhanced Performance Thermal Compound
GEL-GC-SUPREME-7G
-64 In Stock
The new Gelid GC-Supreme is the ultimate thermal compound thanks to its new nano-scale, ultra-fine molecular structure and this makes the GC-Supreme the new leader in the thermal compounds market. GC-Supreme is made from the purest thermal conducting materials and offers superb thermal conduction. Thanks to its new nano-scale ultra-fine molecular structure, the GC-Supreme fills spaces between the cooler and the processor more effectively than conventional materials.

Ultimate Heat Conductivity
Non-Electrical Conductive
Non-Corrosive, Non-flammable
Non-Curing and Non-Toxic
Anti-Oxidation
No Bleeding and user friendly
GELID Applicator Supplied

Net Content (g) 7
Density (g/cm3) 2.55
Thermal Conductivity (W/mK) >4.5
Viscosity (Centipoise) 250000
EAN barcode 4897025780606
£5.96 (£4.97 ex VAT)
Out of Stock
Noctua NT-H1 Pro-Grade Thermal Paste, 1.4ml
NOC-NT-H1
0 In Stock
Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability. Excellent performance NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results. Maximum ease of use & efficient dosage As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the of your CPU, install the cooler and that's it! Top-performance right from the start NT-H1 reaches its full performance extremely fast and doesn't require a longer 'burn-in' time. Excellent long-term stability NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems. Not electrically conductive, non-corroding NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.
£5.99 (£4.99 ex VAT)
Out of Stock
Thermaltake TG-2 Thermal Grease Gray 4g Supplied 1.5W/mk
TTACCTG2
In Stock

TG2 desirably apply to CPU, GPU, Chipset, and other PC components to get good thermal conductivity producing best heat dissipation.

Key Features

•Performance - Excellent Performance
•Temperature - Wide Temperature Resistance Range
•Conductivity - High Thermal Conductivity
•Resistance - Low Thermal Resistance
•Electrical Conductivity - Low Electrical Conductivity

Specifications

Thermal Conductivity: 1.5 W/mK
Shelf-Life: 24 months from DOM

General Specifications

Manufacturer Part Number: CL-O0028
EAN Number: 4712487786655
Has Mains Plug: No
Colour: Grey
What's In The Box: Thermal Grease
 Product Manual
Unit (Product) Dimensions (mm): 18mm x 13mm x 18mm (W x H x D)
Packaging Dimensions (mm): 114mm x 170mm x 200mm (W x H x D)
Net Weight (KGs): 0.04 KGs
Gross Weight (KGs): 0.068 KGs

£3.48 (£2.90 ex VAT)
Thermaltake TG-3 Thermal Grease Gray 4g Supplied 4.7W mk
TTACCTG3
In Stock

TG3 desirably apply to CPU, GPU, Chipset, and other PC components to get good thermal conductivity producing best heat dissipation.

Key Features

•Performance - Superb Performance
•Temperature - Easily Apply to the surface
•RoHS - RoHS Compliance
•Stability - Absolute Stability

Specifications

Thermal Conductivity: 4.7 W/mK
Shelf-Life: 24 months from DOM
Operation Temperature: -50 C

General Specifications

Manufacturer Part Number: CLZ0022
EAN Number: 4716872053094
Has Mains Plug: No
Colour: Grey
What's In The Box: Thermal Grease
 Product Manual
Unit (Product) Dimensions (mm): 24mm x 12.5mm x 12.5mm (W x H x D)
Packaging Dimensions (mm): 136mm x 158mm x 143mm (W x H x D)
Net Weight (KGs): 0.04 KGs
Gross Weight (KGs): 0.076 KGs

£6.58 (£5.49 ex VAT)